唐林教授









學科領域(Major field

機械設計及理論學科教授。

Modern design theory of mechanical systems

學術兼職(Professional Activities)

1、中國機械工程學會 機械設計分會委員;

3、上海市機構學及創新設計委員會委員;

3、上海市機械工程學會會員;

4、上海市現代設計法研究會會員。

Since 2008

Committee member, China Society ofMechanical Design

Since 2005

Reviewer, National Science Foundation of China

Since 2004

  • Cpmmittee member, Shanghai Committee of Mechanism and Innovative Design

  • Member, Shanghai Society of Mechanical Engineering

  • Member, Shanghai Seminar of Modern Design Methodology


承擔課程Courses Taught

1、金屬切削機床概論(本科)

2、金屬切削機床設計(本科)

3、精密機械零件設計(本科)

4、機械設計基礎(本科)

5、機械原理(本科)

6、產品概念設計(本科、碩士)

7、產品設計理論與方法(博士)


      • Fundamentals of machine tooling

      • Machining and its tool design

      • Design of precision mechanical elements

      • Fundaments of machine design

      • Theory of mechanisms and machines

      • Conceptual design of products

      • Theory and methodology of products

研究方向(Fields of Research

  • 計算機輔助機構/機械系統概念設計---理論、方法及工具

  • 產品概念設計理論及方法

  • 集成設計理論及方法

  • Theory, methodology and tool for Computer-aided conceptual design of mechanical systems

  • Theory and methodology for conceptual design of products

  • Theory and methodology for integrated design

榮譽及獲獎情況(Awards)

  • 著作《產品概念設計基本原理及方法》獲上海汽車工業教育基金會優秀著作三等獎

  • 《機械設計基礎》教學課件獲教育部組織的全國第五屆多媒體課件大賽三等獎

  • 云南省高等院校青年教師課堂教學比賽三等獎

  • 昆明理工大學青年教師課堂教學比賽一等獎

  • Book “Principle and method for conceptual design of products”, a 3rd award, Shanghai Automotive Educational Foundation.

  • Courseware “fundamentals of mechanical design”, a 3rd award, Information centre for education management of the Education Ministry of P.R. China

  • Province-wide Teaching Evaluation for the higher education, a 3rd award, YunnanProvince

  • Teaching Evaluation, the 1st award, Kunming University of Technology

近幾年承擔的科研項目

1、主完成持《機械設計基礎教學模式與學生創新設計能力培養》(2006)

2、主持完成《模切機遞紙機構運動系統概念設計》(2006)

3、主持完成《模切機牙排移植設計》(2004)

4、主持完成《機械運動系統概念設計自動化模型》(2003)

5、參加完成《機械運動方案智能CAD設計理論及其實現》(國家自然科學基金,2000)

著作及電子出版物(Books and electrical publications )

2010,唐林(參編)《機械原理》.北京:清華大學出版社,北京交通大學出版社,ISBN 978-7-81123-756-6

2010Tang, Lin. (Confederate author), Mechanical Theory, Tsinghua University Press, Beijing Jiaotong University Press Beijing, P.R. China,ISBN 978-7-81123-756-6,(in Chinese)

2010,唐林(參編)《趣談無所不在的設計》.北京:科學出版社

2010Tang, Lin. (Confederate author), Funny talk about the design in everywhere, Science Press, Beijing, P.R. China, 2010,

ISBN 978-7-03-028294-1,(in Chinese)

2008,唐林《機械設計基礎》教學課件.北京:清華大學出版社,ISBN 978-7-89474-123-3

2008Tang, Lin. Courseware for Fundamentals of machine design, Tsinghua University Press, Beijing, P.R. China,

ISBN 978-7-89474-123-3,(in Chinese)

2008,唐林《機械設計基礎》.北京:清華大學出版社,ISBN 978-7-302-18596-3,

2008Tang, Lin.Fundamentals of machine design, Tsinghua University Press, Beijing, P.R. China,ISBN 978-7-302-18596-3,

(in Chinese)

2006,唐林.產品概念設計基本原理及方法.北京:國防工業出版社,ISBN 978-7-118-04494-6

2006Tang, Lin. Principle and method for conceptual design of products. National Education Press, Beijing, P.R. China,

ISBN 978-7-118-04494-6, (in Chinese)

博士及博士后研究(Research of Ph. D and Postdoctoral

2000 Tang, Lin, Automated synthesis theory and realization for mechanism types. Ph.D. Dissertation (in Chinese), ShanghaiJiaotongUniversity, Shanghai, P. R. China

2002 Tang, Lin. Research on automated system for selection and combination of mechanisms based on set theory. Report of Postdoctoral Research Work (in Chinese), DonghuaUniversity, Shanghai, P. R. China

主要論文(Publications

2009劉鈺,唐林,基于輔助特征的平面桿系機構自動化裝配.機械設計與制造,(12):65-67

2009 Liu Y. and Tang, Lin., Automation assembly of planar linkage mechanism based on auxiliary feature. Machinery Design and Manufacture. (12): 65-67 (in Chinese)

Abstract The parametric design of planar linkage mechanism parts,and the automated identifying, positioning and assembling of their mating features are presented in this paper, based on the auxiliary datum features of CAD environment in Solidworks.

2009TangLinSun X-Q. Method and Realization of Computer-Aided Combination of Assur Groups in Conceptual Design of Planar Linkage Mechanisms,The ASME/IFToMM International Confrence on Reconfigurable Mechanisms and Robots, London,123-128,EI收錄(20094612456081)

Abstract Combination of Assur groups is one of important methods in conceptual design of planar linkage mechanisms. Although there are not many researches in this arena, the authors attempt to address two fundamental problems associated with the combination of Assur groups: 1) description and reorganization of Assur groups and other kind of groups; 2) Combinationcompatibility among Assur groups. The paper also presents a couple of examples to demonstrate how to realize the design by using the methods described.

2008Tang Lin. An Approach to Function Identification in Automated Conceptual Design of Mechanism systems. Research in Engineering Design, 19: 151-159,SCI收錄(IDS Number: 370NV),EI收錄(20084711712775), (in English)

Abstract It has been a challenge in computer-aided conceptual design of mechanism systems as how to describe the kinematic requirements and the functions of a mechanism so that computers can easily recognize, and eventually make automatic selections and combinations among many different types of mechanisms (those combinations include mechanisms of single and multi-degree of-freedom, and connected in series, or paprallel, or overlap,or feedback). In this paper, a methodology is presented to describe the kinematic characteristics of mechanism systems and their associated requirements so that they can easily recognized by computers. A practical approach is to define 'a kinematic function' to represent the kinematic characterizations of a.mechanism. It reflects the input and output motion of a given system. This kinematic function can regularly and accurately be described using function units and trees (any function tree consists of more than one function units and is regularly expressed). Because of its uniqueness, the process of mechanism synthesis can be easily recognized by a computer. The methodology demonstrated in the paper has universality and has been successfully incorporated into a software, which has been proven to be an useful tool for the conceptual design of mechanism systems.

2008 Tang Lin. An approach to the selection of mechanism types in computer aided conceptual design. Journal of Mechanical Engineering Science - Part C, 222 (3), 423 ~ 433,SCI收錄(IDS Number: 298PH),EI收錄(20082111262558), (in English)

AbstractThe selection of mechanism type is one of the important aspects in conceptual design of machine products. The paper applies the set theory for representing the attribute items of kinematic function to reflect the kinematic state and the function quality to reflect overall performances of the function unit for some complex design task. It gives a set-theory-based mode for the selection of mechanism types, in which precise reasoning by computer is combined with fuzzy appraisement by human. By precise reasoning at first, the computer selects from mechanisms database those mechanisms that can meet the kinematic requirements of the function unit to be solved. And then the function qualities of the selected mechanisms are appraised by human approving, which is actually a process of fuzzy match. This approach avoided the difficulty that the computer cannot yet effectively process fuzzy information and is suitable for the selection of both single-degree-of-freedom (DOF) and many-DOF mechanisms. The selected mechanisms can thusmeet the requirements not only of the kinematic function, but also of the function quality. The approach presented in the current paper has been successfully applied to the software development of computer-aided conceptual design of mechanism systems.

2007唐林,張孟春.基于裝配特征模塊的虛擬自動裝配方法研究.機械設計與制造,(10):159 ~ 161

2007Tang, Lin. and Zhang M-Ch. Research on automatic assembly based on assembly feature modules . Machinery Design and Manufacture.,(10): 159-161, (in Chinese)

AbstractIn order to ascertain the assembly relationship between assembly features of the parts being assembled under the assembly environment, the paper presented a new way for virtual automatic assembly based on assembly features’ modularized. This method analyses the assembly features of the single part or sub assemblies and then saves the features as different function modules. Using inherited way to finish assembly action with assembly data module and assembly relationship module which can ensure the consistency of data of the assembly features during the design. Taking involute straight teeth gear for example to explain the practicability and superiority of this method .

2007唐林.機械設計基礎課程教學模式改革與學生創新能力培養.第二屆機械類課程報告論壇論文集,北京:高等教育出版社

2007Tang, Lin.Reform of teaching mode and training of innovation ability of students. Higher Education Press, Beijing, P.R. China,(in Chinese)

AbstractCombining with teaching of “theory and elements of mechanisms and machine”, this paper introduces the reforms of the teaching mode and methods of appraising the ability of students, its effects for enhancing study interest and ability to use knowledge as well as for cultivating innovation ability and team spirit of students. Besides,the paper points out that currently courses system and teaching plans are not harmonious to train innovators and inventors.

2006 Tang Lin.Many-degree of freedoms mechanism combination in automated conceptual design of mechanism systems.Journal of Mechanical Engineering Science,,220(5):727 ~ 740,SCI收錄(IDS Number: 073KP),EI:20063310069444,ISI:000239742000015

Abstract: This article presents the mechanism combination’s modes, fundamentals, reasoning rules, and realization methods in the automated conceptual design of mechanism systems. According to the combination form between two function units, with the aid of morphology matrix, applying a recursive mode of mechanism combination and the reasoning system based on set theory, the function units’ solutions in the form of combination mechanisms can conveniently be generated. The theory and method presented in this article can simplify the process of mechanism combination and the reasoning rules and are suitable for the combination between not only single-degree-of-freedom mechanisms, but also many-degree-of- freedom mechanisms. They have successfully been applied to the software development of automated conceptual design of mechanism systems.

2006 唐林,王希金.機構自動化選型中基于特征的軌跡識別方法.工程設計學報,13(2) :70-73

2006Tang, Lin. and Wang X-J. Orbit identification method for automatic mechanism selection based on their characteristics . Journal of Engineering Design. 13(2):70-73,(in Chinese)

Abstract:In automated selection system based on orbit characteristics and dimension parameters of key orbit segments are momentous for selecting mechanisms. An orbit curve identification method based on characteristic is presented. By describing orbit curves with abundant forms with the basic orbits such asline, arc, cusp and “8” form, identification of orbit characteristics can be well solved and fundamental characteristic parameters of key orbit segments can be determined

2003唐林,孫少杰,基于FlashMX平臺的四桿機構參數化運動仿真.上海市機械工程學會慶祝50周年暨第二屆上海機械科技論壇文集,77-78,(會議宣讀論文),上海市機械工程學會編輯出版

2003Tang, Lin. and Sun, S-J. Dynamic simulation of various types of four-bar linkages by using FlashMX . Proceedings of Conference of the Second Forum of Mechanical Science and Technology in Shanghai, China,77-78,(in Chinese)

Abstract This paper introduces an approach to parameterized dynamic simulation of various types of four-bar linkages based on the software FlashMX. Namely, the type of four-bar linkages can change automated along with length changes of each bar in four-bar linkages, and man can simultaneously see the motion of this type of four-bar links.

2002 唐林,王生澤,計算機識別的機構組合模型.中國機械工程,13 (24),2111-2115,EI收錄(EI03117399213)

2002Tang, Lin. and Wang, S-Z.Study on automated combination of mechanisms and their model build-up. China Mechanical Engineering,13(24), 2111-2115,(in Chinese)

AbstractIn order to realize computer aided connection between mechanisms, researches on mode, compatibility and approach of connection between mechanisms are carried out in detail, and thereby, a model for connecting mechanisms was upbuilt. According to concrete requirements for a function unit whose mechanical solution will be obtained by connecting mechanisms, this model has two kind of modes that are for minimum granularity function unit and for non-minimum granularity function unit respectively. The modes can been programmed and have been successfully applied to exploitation of software for connecting modes can be programmed and have been successfully applied to exploitation of software for connecting mechanisms with this software, and this laid a good foundation for realization of intelligent CAD of mechanical kinematic scheme.

2001 Tang Lin, He,W., Zou, H-J,Das Prinzip automatisierter Kombination von Mechanismen und dessen Realisierung. (The principle for automated connection of mechanisms and its realization). Mechanism and Machine Theory, 36(8),SCI收錄 (IDS Number: 470MA);EI收錄(EIP01406668368)

Abstract The problem roomage for automated connection of mechanisms in intelligent CAD for mechanical kinematics scheme was divided into kinematics function request and function quality request in this paper. Through computer reasoning, two mechanisms that are compatible in connection and can satisfy the needs for kinematics characteristic after connection were acquired. Then, a decision whether

mechanisms are connected is made by man according to the information of their function qualities. Under the guidance of the thought, author explored principles and methods for automated connection of mechanisms, which can be identified by computer, and applied these research results to software development for automated synthesis of mechanisms. It was realized that two rigidity mechanisms were reconnected automated.

2001 唐林,鄒慧君,計算機輔助機構選型的實現.中國機械工程,12(8),918-921

2001 Tang, Lin. and Zou, H.-J. Accomplishing CAD of Selecting Mechanisms. China Mechanical Engineering, 12(8), 918-921,(in Chinese)

Abstract Task requirements of automated selecting mechanisms were compartmentalized into motion function and function qualities. We described the motion function in standardization methods and represented function qualities in human language. In the process of automated selecting mechanisms, the solutions meeting requirements of motion function were captured by accurate ratiocination that were completed by a computer. These mechanisms and the appraisals about their function qualities were stored in knowledge base. Designer can select them according to function qualities of each mechanism and complete fuzzy ratiocination. The reasoning method for automated selecting mechanisms is so predigested, and automated selecting mechanisms become reality. The difficulty of CAD for mechanical kinematic scheme is solved and then CAD for mechanical kinematic scheme has a good base.

2001 Tang, Lin. and Wang, S.-Z., Research on Model of intelligent CAD System for Mechanical Kinematic Scheme. Mechanical Science and Technology, 20(5), 784-786,792 (in Chinese)

Abstract A design mode of intelligent CAD for mechanical kinematic scheme in which mankind cooperates with computer is put forward after analyzing the factors restricting its development, and an object-oriented intelligent CAD system design model in which each subject ( subsystem ) has its independent design mode and method was established according to design characteristics of different design layers in design process. It makes possible the expansion and realization of intelligent CAD system for mechanical kinematic scheme, and simplifies its design, maintenance and management of the CAD system program.

  • 唐林,王生澤,基于集合理論的機構自動化選型系統.機械工程學報, 37(8),23-28,EI收錄 (EI02397107738)

2001 Tang, Lin. and Wang, S.-Z.,System for automated Selection of Mechanisms Based on Set Theory, Chinese Journal of Mechanical Engineering, 37(8), 23-28,(in Chinese)

Abstract Thesystem for automated selection of mechanisms is divided into problem space and solution space and a mode for automated selecting mechanisms is set up, which is based on set theory and a working means of that man cooperates with computer. From problem space to solution space, different mapping ways are used for kinematical characteristic and function quality. Namely computer selects the mechanisms satisfying kinematical function request by exactly inference. These mechanisms form a new solution space W'J. According to the function quality of the mechanisms in W'Jman selects the usable mechanisms tallying with the request of function quality and a optimum mechanism from W'J. Therefore, the difficult problem of standardized describing the request of selecting mechanisms and the information of a mechanism is solved. According to the advanced principle, the automated selection of mechanisms has good come true.

2000唐林,鄒慧君,用設計單元法實現計算機輔助機械運動方案設計.計算機輔助設計與圖形學學報,12(8),EI收錄(EI00095340737);收入《中國經濟技術發展優秀文集》

2000 Tang, Lin. and Zuo, H.-J. Accomplishing CAD of mechanical kinematic scheme by the Method of Design Uni. Journal of Computer Aided Design and Computer Graphics, 12(8), 614-617, (in Chinese)

Abstract“Design unit” consists of “function unit” which is found the mechanism solution and its sub-function units. Using the method of design unit can simplify complicated design of kinematic scheme, i.e. finding the mechanism solution for a single function unit in each design unit. On the basis of that, this paper establishes design model for kinematic scheme of machinery. The design model can be

ognized by a computer and solves a key problem of kinematic scheme designing by computer aiding. About description of function unit, a basic work which is computer aiding to find the mechanism solution of function unit, the author apply object-oriented method to automatic descriptions of function unit and combination mode of the sub-function units by form and direction of motion, rate of motion, performing parts, a sub-function structure and a set of relevant “operation”.

2000 唐林,鄒慧君,機械產品方案的現代設計方法及發展趨勢.機械科學與技術,19(2), 192-196, EI收錄(EI00045107395)

2000 Tang, Lin. and Zou, H-J. , An overview of the existing methods and development trend of mechanical products design. Mechanical Science and Thenology, 19(2), 192-196, (inChinese)

Abstract According to the main characteristics of the cognitive process of scholars in the project design for mechanical products at present, we put the existing design methods intofour classesnamely, systematic design,structural design,knowledge-based design and intelligent design. We then analyzed the characteristics of each design method and the relationship among these four methods. Finally, we pointed out the development trend of computer-aided project design for mechanical products.

2000 唐林,童昕,自動化概念設計中機構功能的識別.機械設計,17(12)

2000Tang, Lin and Tong, X.,Identificationof mechanism function in automated conceptual design. Journal of Machine Design, 17(12), 39-41, (in Chinese)

Abstract This paper brings forward a manner that computers discern mechanism function by resolving mechanism function into kinematic function and function quality. The kinematic function describes kinematic characteristics of a mechanism with four attributes, motion form; motion axes, movement direction and rate of movement, and has uniqueness. It is rational basis of computer in automated conceptual design. Function quality reflects performance characteristic and is one of the mechanism attributes. It is described with humanity language and is the basis that human make strategic decision in automated conceptual design. This manner describing mechanism function can be discerned by computer and tallies with the design thought of humankind. So, the difficult problem that mechanism functions can’t be discerned in automated conceptual design has been solved in this paper.

1999唐林,鄒慧君,德國機械產品方案設計方法研究動態.機械設計,16(8):1-4

1999 Tang, Lin. and Zou, H.-J., An overview of design method for mechanical products in Germany. Journal of Machine Design, 16(8), 1-4, (in Chinese)

AbstractThis paper generalizes the design method for mechanical product in Germany into four types, which are systematized design,structuralized design,object-oriented and knowledge-based design,and the design by means of the technology of the software and hardware of computers. We discuss the prospects of application and the developing directions of these four methods in the design of mechanical products.

1999唐林,鄒慧君,機械產品運動方案創新設計的CAD方法及實現模型.機械設計與研究,(4):20-22

1999 Tang, L. and Zou, H.-J.,The Method and Model of Computer aided Creation Design of a Mechanical Product Scheme. Machine Design and Research, (4), 20-22, (in Chinese)

AbstractThe creation design of a mechanical product scheme can come true by changing function structure, inventing new mechanisms and combining mechanisms. This paper builds the creation design model of a mechanical product scheme, brings forward the rules of describing function structure and the systematism methods of searching mechanisms that realize specified function and combining them. In the methods, computer can identify a creation design mode of a mechanical product scheme and design process can be described by program.

1998唐林,面向對象的液壓系統動態特性仿真研究.機械制造,36(8):11-13

1998 Tang, Lin, Dynamic simulation for the object-oriented hydraulic system. Machinery, 36(8), 11-13,(in Chinese)

AbstractThis paper explained how to use the Object-Oriented method to determine the object of the hydraulic system and to simulate

dynamic performance of the hydraulic system . And it also use hydraulic cylinder as an example to explain how to use VC++ language to descript the classes of the hydraulic system .Finaly, it analyse the advantages of using this method in dynamic analyse of a hydraulic system

1997 唐林,汽車的回收策略和綠色設計策略.汽車技術,(10):56-58

1997 Tang, Lin, Strategy for environmental friendly design of automotive industry. Automobile Technology, (10), 56-58 (in Chinese)

AbstractThe auto industry is being in rapid developing phase in China. The relationship between auto industry and friendly environment is treated from the reusability and green design

1995 唐林,用解析法求解空間周轉輪系中行星輪轉速.華僑大學學報,(02)

1995 唐林,機械設計課程設計改革設想.機械設計教學研究(全國教學會議論文集)機械工業出版社出版

1995 唐林,大學工科實踐性教學環節思考與探索.華僑高等教育研究, (27)

1990唐林,車削過程中的振型關聯顫振穩定性分析新方法.淮南礦業學院學報,(03),此文1991年獲昆明理工大學優秀科技論文三等獎

譯文(Translation

2008唐林(德譯中),M. Kreimeyer, W. Keijzer, U. Lindemann (著),產品開發過程中的危機管理.工程設計學報,15(5):330-333

2008 Tang, Lin (Translation from German into Chinese)M. Kreimeyer, W. Keijzer, U. Lindemann,Methodisches Handeln bei Krisen in der Producktentwicklung.Journal of Engineering Design. 15(5):330-333,

國際交流與合作(International cooperation

  • 1987—1988國家教委公派在德國Dresden技術大學做訪問學者1年

  • 2009—2010受德國學術交流中心(DAAD)王寬成教育基金資助,在德國Kaiserslautern 工業大學做訪問學者1年

EMAILLtang@dhu.edu.cn;Ltang@126.com


ag亚游集团官网官方网站 - 亚游登录网址